Utilization of Quarry Dust as a Partial Replacement of Fine Aggregate in Glass Fibre Reinforced Concrete introduction

Abstract

Concrete plays important role in the construction of structures. The need for concrete increases day by day. Material required for concrete are getting depleted, so there is a requirement to find alternatives. At the same time the alternative materials should posses the property of the actual materials used in concrete and also they must provide the required strength to the concrete. Normally Concrete is firm in compression but anemic in tension and shear. The purpose of this study is to find the behaviour of concrete reinforced with hybrid macro fibers. By adding Glass fibers in percentages like 0.2%, 0.4%, 0.6%& 0.8% to the concrete, the properties like compressive, flexural and split tensile strength are investigated. The optimum percentage of glass fiber was found to be 0.4%. Quarry dust has been widely used in structures since ancient times. The present study is aimed at utilizing waste Quarry dust (WQD) in construction industry itself as fine aggregate in concrete, replacing natural sand and also by adding the optimum percentage of glass fibers. The replacement is done partially and fully in the various proportions like 0%, 25%, 50%, 75% and 100% and its effect on properties of concrete were investigated. The optimum percentage of the concrete by adding 0.4% of glass fiber and the proportions was found to be 25%.