Abstract

Alkali – Aggregate Reaction is an unwanted reaction which occurs in concrete, mainly the area which is subjected to more moisture content. It occurs over time, between cement paste and silica. This in turn alters the expansion of the aggregate and often in an unpredictable way, which will result in loss of strength of concrete and also a complete failure. Hydro structures, mainly Dams store water, presence of moisture can cause such problem, comparatively more than the other structures. Normally, most of the dams had been constructed several years back and they still exist. The design was based on the environmental conditions prevailed at that period. But now the fast changing environmental aspects and industrial growth and technological development apart from global warming has severe impact on the life and performance of the dams. Dam Structures cannot be easily replaced, and the swelling can block spillway gates or turbine operations. The durability of dams has the impact on human life, society and the environment. To enhance the life and durability of the dams or hydro structures, several studies were made. There are two forms of Alkali Aggregate Reactions available, Alkali Silica Reaction and Alkali Carbonate Reaction and this paper reviews Alkali Aggregate reaction within concrete construction.

Keywords

Alkali – Aggregate Reaction, moisture, durability,

Downloads

Download data is not yet available.

References

  1. Zihui Li, Robert J. Thomas, Sulapha Peethamparan, “Alkali-silica reactivity of alkali-activated concrete subjected to ASTM C 1293 and 1567 alkali-silica reactivity tests”, Cement and Concrete Research, Volume 123, September 2019, Article 105796.
  2. L. F. M. Sanchez, B. Fournier, M. Jolin, D. Mitchell, J. Bastien , “Overall assessment of Alkali-Aggregate Reaction (AAR) in concretes presenting different strengths and incorporating a wide range of reactive aggregate types and natures”, Cement and Concrete Research, Volume 93, March 2017, Pages 17-31
  3. Chang Li, Michael D. A. Thomas, Jason H. Ideker , “A mechanistic study on mitigation of alkali-silica reaction by fine lightweight aggregates”, Cement and Concrete Research, Volume 104, February 2018, Pages 13-24
  4. Andreas Leemann, Beat Münch, “The addition of caesium to concrete with alkali-silica reaction: Implications on product identification and recognition of the reaction sequence”, Cement and Concrete Research, Volume 120, June 2019, Pages 27-35.
  5. R. A. Deschenes Jr., E. R. Giannini, Thano Drimalas, B. Fournier, and W. M. Hale, “ Mitigating Alkali-Silica Reaction and Freezing and Thawing in Concrete Pavement by Silane Treatment” ACI Material Journal, V. 115, No. 5, September 2018, pp 685-694.
  6. Bryce D. Fiore, Kenneth Gerow, Matthew P. Adams, and Jennifer E. Tanner, “Accelerated Mortar Bar Test Precision with Recycled Concrete Aggregate”, ACI Material Journal, V. 115, No. 5, July 2018, pp 531-540.
  7. Mohammad Amin Hariri-Ardebili, Victor E. Saouma, and Christine Merz, “Risk-Informed Condition Assessment of a Bridge with Alkali-Aggregate Reaction”, ACI Material Journal, V. 115, No. 2, March 2018, pp 475-487.
  8. Zdzis?awa Owsiak, “Testing Alkali-Reactivity Of Selected Concrete Aggregates” Dept of Civil and Environmental Engineering, Technical University of Kielce, al. 1000-levcia, Kielce, Poland P.P. 7, 25-314.
  9. M. D. A. Thomas, “Field studies of fly ash concrete structures containing reactive aggregates” , M Magazine of Concrete Research ISSN 0024-9831 | E-ISSN 1751-763X Volume 48 Issue 177, December 1996, pp. 265-27.
  10. Daniela Eugenia Angulo-Ramírez, Ruby Mejía de Gutiérrez, Marcelo Medeiros, “Alkali-activated Portland blast furnace slag cement mortars: Performance to alkali-aggregate reaction” Construction and Building Materials 179 (2018) pp 49–56