Abstract

The characterization of Isanlu-Isin columbite was conducted to obtain data suitable for its beneficiation to metallurgical grade. Samples from various locations within the mining site underwent homogenization, crushing, and grinding for characterization. Chemical analysis was performed using Energy Dispersive X-ray Fluorescence Spectroscopy (ED-XRF), while mineralogical analysis employed a Scanning Electron Microscope with Energy Dispersive Spectroscopy (SEM-EDS), X-ray Diffraction (XRD), and petrological examination. ED-XRF results revealed that the crude samples contain 10.070% Nb₂O₅, along with trace amounts of other minerals (gangue). Mineralogical characterization confirmed the presence of columbite, quartz, and tantalite. SEM imagery showed a uniformly distributed coarse grain structure, while EDS analysis identified Mn, Nb, Si, and Fe in their oxide forms. Silicon and niobium were found to be the predominant elements in the matrix. This characterization confirms that the ore contains niobium pentoxide, the primary mineral of interest. The data obtained serves as a foundation for effective pre-processing strategies to recover niobium pentoxide in the extractive metallurgy industry.

Keywords

Niobium Pentoxide, Columbite, Characterization, Liberation size, Homogenization,

Downloads

Download data is not yet available.

References

  1. X. Yang, J. Zhang, X. Fang, T. Qiu, Kinetics of pressure leaching of niobium ore by sulfuric acid, International Journal of Refractory Metals and Hard Materials, 45, (2014) 218–222. https://doi.org/10.1016/j.ijrmhm.2014.04.001
  2. Y. Liu, C. Zhang, T.L. Di Zhang, H. Qiu, Q.L. Li, J.H. Li, Non-destructive micro X-ray fluorescence quantitative analysis of geological materials, Atomic Spectroscopy, 43(5), (2022) 378-387.
  3. E. Allain, N. Kanari, F. Diot, and J. Yvon, Mineralogical and metallurgical study of niobium ores, Minerals Engineering, 134, (2019) 97-103. https://doi.org/10.1016/j.mineng.2019.01.029
  4. D.G. Thomas, F. Asuke, S.A. Yaro, Determination of some conceptual mineral processing parameters of Soba-Wanka pyrochlore-coltan mineral ore deposit, Nigeria Engineering Conference, 2, (2014) 32-41. https://doi.org/10.1016/j.mineng.2019.01.029
  5. O.O. Alabi, O.B. Akinnodi, Y.E. Gbadamosi, Susceptibility studies of Kuru Plateau State niobium pentoxide bearing ore to gravity and magnetic separation method, 36th Annu. Conf. Nigerian Metallurgical Society, 2021, pp. 228-234.
  6. R.G. Fisher, (2011) Niobium raw materials and processing.
  7. O.O. Alabi, S.A. Yaro, G.T. Dungka, F. Asuke, E.T. Dauda, Determination of work index of Gyel-Bukuru columbite ore in Plateau State, Nigeria, Journal of Minerals and Materials Characterization and Engineering, 3(3), (2015) 194-203, 2015. http://dx.doi.org/10.4236/jmmce.2015.33022
  8. O.O. Alabi, S.A. Yaro, G.T. Dungka, F. Asuke, B. Hassan, Comparative beneficiation study of Gyel columbite ore using double-stage (magnetic-to-magnetic and magnetic-to-gravity) separation techniques, Journal of Minerals and Materials Characterization and Engineering, 4(1), (2016) 181-193, 2016. http://dx.doi.org/10.4236/jmmce.2016.42017
  9. A.R. Alvesa, A. Coutinho, The evolution of niobium production in Brazil, Materials Research, 18(1), (2017) 106-112. https://doi.org/10.1590/1516-1439.276414
  10. O.O. Alabi, Y.E. Gbadamosi, T. Akinpelumi, Desliming process of Kuru columbite (Plateau State) using scrubbing method towards niobium pentoxide recovery, International Journal of Engineering Research Updates, 1(1), (2021) 043-049. https://doi.org/10.53430/ijeru.2021.1.1.0044
  11. A.V. Benedito, C.A. Benedetty Torres, R.M.D.C. Silva, P.A. Krahl, D.C.T. Cardoso, F.D.A. Silva, C.H. Martins, Effects of Niobium Addition on the Mechanical Properties and Corrosion Resistance of Microalloyed Steels: A Review, Buildings, 14(5), (2024) 1462. https://doi.org/10.3390/buildings14051462
  12. T.F. De Oliveira, C.P. De Souza, A.L. Lopes-Moriyama, Acid leaching and thermal treatments in the obtaining of mixed oxides of Nb and Ta from ferrocolumbite, Minerals Engineering, 147, (2020) 1–7. https://doi.org/10.1016/j.mineng.2019.106157
  13. M. Gislev, M. Grohol, F. Mathieux, F. Ardente, S. Bobba, P. Nuss, (2018) Report on Critical Raw Materials and the Circular Economy, Publications Office of the European Union, Luxembourg.
  14. Roskill Information Services Ltd., Niobium Market Report, 2013.
  15. M.L. Yerima, A.S. Abdulrahman, Physiochemical analysis of Chanchaga ore, North Central Nigeria, Journal of Applied Sciences, 15(7), (2015) 1020. https://doi.org/10.3923/jas.2015.1020.1025
  16. N.S. Nzeh, P. Patricia, D. Okanigbe, S. Adeosun, A. Adeleke, Physical beneficiation of heavy minerals–Part 2: A state of the art literature review on gravity concentration techniques, Heliyon, 9(8), (2023).
  17. J.B. Abraham, V.K. Andrey, K.B. Joseph, P.J.G. Pär, Characterization of chemical composition and microstructure of natural iron ore from Muko deposits, ISRN Materials Science, 2012, (2012) 174803. https://doi.org/10.5402/2012/174803
  18. Y.E. Gbadamosi, O.O. Alabi, J.O. Borode, Evaluating the potentials of liberation size determination in Anka (Zamfara state, Nigeria) manganese ore and its comminution tendency using bond index technique, Journal of Materials Science Research and Reviews, 8(1), (2021) 7-18.
  19. O.O. Alabi, O.W. Awogbamila, Determination of grindability characteristics of Duguri (Nigeria) galena towards effective beneficiation process, Science and Technology, 6(22), (2020) 83–92.
  20. M.O. Adeoti, O.A. Dahunsi, O.O. Awopetu, F.O. Aramide, O.O. Alabi, O.T. Johnson, A.S. Adulkareem, Determination of work index of graphite from Saman-Burkono (Nigeria) using modified Bond’s method, Nigerian Journal of Technology, 38(3), (2019) 609–613. https://doi.org/10.4314/njt.v38i3.10
  21. N. S. Nzeh, A. P. I. Popoola, D. Okanigbe, S. O. Adeosun, and A. A. Adeleke, Work index evaluation of Rayfield-Jos columbite mineral for effective processing and recovery of niobium and tantalum,Materials Today: Proceedings, 105, (2024) 131–138, 2024. https://doi.org/10.1016/j.matpr.2023.08.059